| |
 |
| |
| There are different ways to install
cellular
amplifiers in vehicles such as: one with hands-free kit, direct
connect cable to cell phone, or with a cell phone cradle and a
in-vehicle antenna. |
| |
|
| 1 |
SBX series model are typically used with hands-free
kit or using a direct connection to your cell phone. |
| |
|
| 2 |
SBX series model can also be used with
any cell phone cradle and in-vehicle antenna placed inside on the
windshield or on the windshield side panel. |
| |
|
| |
 |
| |
| Selecting A Suitable Location
for Mounting the Cellular Amplifier (SBX) |
| |
| Locate a suitable place to
mount and conceal the cellular amplifier. Suitable mounting locations
include under the vehicle’s dashboard or under the front seat.
For optimal performance, the cellular amplifier should be mounted as
close to the wireless handset as possible. The location should be
easily accessible and free of moving parts, excessive heat, and moisture. |
| |
 |
This product is for use with a negative
ground +12V to +24 power supply or battery. |
| |
|
|
Disconnect the vehicle’s negative
“—“battery or power terminal before installing hardwired
power cable. This will reduce the chance of short circuits during
installation. |
| |
|
|
Before wiring the power connection, make
sure that the ignition switch is turned "OFF" and connect the hardwire power
cable to hot wire (Positive) from Ignition switch and connect the
negative wire to a chassis Ground. |
| |
|
|
External Antenna connects into the
cellular amplifier
“Antenna” connector. |
| |
|
|
In-Vehicle Antenna or Cell
Phone connects into the cellular amplifier “Cell Phone” connector |
| |
|
|
After power ON observes the LED’s.
For further detail
Click Here to see SST® condition.
All SBX
Series are not equipped with SST® Technology. |
| |
|
| WARNING: The
External car antenna should be placed at a minimum distance of (4
to 6 Feet ) away from the driver, passengers, or bystanders. |
| |
 |
PRECAUTIONS ON INSTALLATION |
| |
|
Use caution prior to drilling or making holes in
the vehicle. Check the area to be drilled on both sides to avoid damage.
|
| |
|
|
Avoid drilling through or near fuel lines
and tanks, brake lines, transmission lines or other wiring of the
vehicle. |
| |
|
|
Do not mount the cellular amplifier or it’s
associated wiring in a location that may interfere with the safe operation
of the vehicle. |
| |
|
|
If possible, mount the cellular amplifier on a metal
surface to dissipate any heat. |
| |
|
| Note: |
The information in this document
is subject to change without notice in order to improve reliability,
design, or functions of the product, nor it represents a commitment
on the part of this company or its affiliates.
In no event shall Boston Amplifier or its affiliates be liable for
direct, indirect, any incident, or consequential damages arising out
of the use or the inability to use the product or documentation, even
if advised of the possibility of such damages.
No part of this reference manual may be reproduced or transmitted
in any from or by any means without the prior written consent of
the company. |
| |
|
