| |
 |
| |
| There are different ways to install booster
amplifiers in vehicles one with hands-free kit, direct connect cable
to cell phone, or with a cell phone cradle and a Boston Amplifier
APM (Antenna Port Module). |
| |
|
| 1 |
SBX series model are typically used with hands-free
kit or using a direct connection to your cell phone. |
| |
|
| 2 |
SBX series model can also be used with
any cell phone cradle and APM placed in the cradle and attaching it
with Velcro. Place your cell phone in the cradle where the backside
of the cell phone is touching the APM. |
| |
|
| |
 |
| |
| Selecting A Suitable Location
for Mounting the Booster Amplifier (SBX) |
| |
| Locate a suitable place to
mount and conceal the Booster Amplifier. Suitable mounting locations
include under the vehicle’s dashboard or under the front seat.
For optimal performance, the Booster Amplifier should be mounted as
close to the wireless handset as possible. The location should be
easily accessible and free of moving parts, excessive heat, and moisture. |
| |
 |
This product is for use with a negative
ground +12V to +24 power supply or battery. |
| |
|
|
Disconnect the vehicle’s negative
“—“battery or power terminal before installing hardwired
power cable. This will reduce the chance of short circuits during
installation. |
| |
|
|
Before wiring the power connection, make
sure that the ignition switch is off and connect the hardwire power
cable to hot wire (Positive) from Ignition switch and connect the
negative wire to a chassis Ground. |
| |
|
|
External Antenna connects into the amplifier
“Antenna” connector. |
| |
|
|
Internal Antenna or Cell
Phone connects into the amplifier “Cell Phone” connector |
| |
|
|
After power ON observes the LED’s.
For further detail Click Here to see SST® condition. Some SBX
Series are not equipped with SST® Technology. |
| |
|
| WARNING: The
External car antenna should be placed at a minimum distance of (4
to 6 Feet ) away from the driver, passengers, or bystanders. |
| |
 |
CAUTIONS ON INSTALLATION |
| |
|
Use caution prior to drilling holes in
the vehicle. Check the area to be drilled on both sides to avoid damage.
|
| |
|
|
Avoid drilling through or near fuel lines
and tanks, brake lines, transmission lines or other wiring of the
vehicle. |
| |
|
|
Do not mount the Amplifier or it’s
associated wiring in a location that may interfere with the safe operation
of the vehicle. |
| |
|
|
f possible, mount the Amplifier on a metal
surface to dissipate any heat. |
| |
|
| Note: |
The information in this document
is subject to change without notice in order to improve reliability,
design, or functions of the product, nor it represents a commitment
on the part of this company or its affiliates.
In no event Boston Amplifier or its affiliates be liable for direct,
indirect, special incidental, or consequential damages arising out
of the use or the inability to use the product or documentation, even
if advised of the possibility of such damages.
No part of this reference manual may be reproduced or transmitted
in any from or by any means without the prior written permission of
the company. |
| |
|
